仿木栏杆掉漆是很多客户都会关心的问题;当然,仿木栏杆都会经历一个运输的过程,从工厂生产完工后运到施工的工地;有的路途遥远且波折,担心在运输和安装搬运过程会造成损伤和掉漆;
那么仿木栏杆掉漆的原因是什么?
其实;导致仿木栏杆掉漆的原因有两个;
原因一;油漆本身的原因;
油漆本身质量的因素;油漆的生产厂家供应商有大厂小厂生产的油漆质量参差不齐,油漆供应商很重要;常山县怡杰园林绿化服务的栏杆对油漆质量的质量监管严格把关;对油漆试用中出现质量不好的供应商会坚决换掉;对于外观的把控严格规范化!
原因二;栏杆的强度
栏杆的强度也是影响掉漆的原因之一;那么,栏杆的强度如何把控?当然是其生产工艺决定栏杆的强度;简单地说,仿木栏杆有钢筋混凝土材质模具生产加工的;模具分为玻璃钢模具和硅胶模具;常山县怡杰园林绿化服务全部采用硅胶模生产的;硅胶模的优势是在生产的过程中;有一个很重要的环节;就是“模具震动过程”!由震动过程避免栏杆内部的空心和气泡;在这一点上,玻璃钢模具是做不到的!
Imitation of wood railings is a matter of concern to many customers; Of course, imitation wooden railings will undergo a transportation process, from the factory production to the construction site after completion; Some travel long and twists and turns, fearing damage and paint loss during transportation and installation and handling;
So what is the reason why the parapet fell out of paint?
Actually; There are two reasons for the loss of paint on imitation wood railings;
Reason one; The cause of the paint itself;
Factors of quality of paint itself; Paint manufacturers suppliers have large plants and small plants to produce paint of uneven quality, paint suppliers are very important; The railings of Yijie Garden Greening Service in Changshan County strictly supervise the quality of paint quality; The supplier of poor quality will be resolutely replaced in the paint trial; For the appearance of strict standardization of control!
Reason two; The strength of the railings
The strength of the railings is also one of the reasons for the loss of paint; So, how does the strength of the railings control? Of course, it is the production process that determines the strength of the railings; Simply put, imitation wood railings have reinforced concrete material mold production and processing; Die is divided into glass steel mold and silicone mold; Changshan County Yijie garden greening services are all produced using silicone mold; The advantage of silica mold is in the process of production; There is a very important link; It is the "mould vibration process"! The process of vibration avoids the hollows and bubbles inside the railings; At this point, FRP molds can not be done!